Skip to main content
Configure Battery and Performance Modes To configure battery,
  1. Launch the M-Tag admin app.
  2. Sign in to the app.
The details screen displays a list of MAC Ids of the available M-Tags.
  1. Select a registered M-Tag.
  2. In device details screen, Battery settings is at the bottom of the page.
  3. Battery Setting:
a) Displays Normal, when battery percentage is 100% b) Displays Low, when battery percentage is less than 20% c) Voltage remains constant 2.92V To configure performance modes,
  1. Launch the M-Tag admin app.
  2. Sign in to the app.
The details screen displays a list of MAC Ids of the available M-Tags.
  1. Select an unregistered M-Tag.
  2. Do the following, in the M-Tag Registration screen:
a) Enter name of the M-Tag b) Select one from the following performance modes at the bottom of the screen: i. High Performance ii. Optimal Performance iii. Battery Saving iv. Custom
Note: High Performance, Optimal Performance, Battery Saving mode the setting is pre-defined.
  1. Select Custom to configure performance mode on your own.
a) Toggle on IR Sensor to hold to unlock
Note: For push notification, background, and foreground unlock modes IR Sensor is not required.
b) Select IR Sensor Distance to change the distance of the hand gesture: i. Immediate ii. Near iii. Far c) Select Advertising Interval Mode to change the signal strength: i. Low ii. Medium iii. High d) Select Bluetooth Distance to change the distance from the app to M-Tag: i. Low ii. Medium iii. High After customizing the performance mode, next tap Register
  1. The M-Tag is successfully updated and registered.