> ## Documentation Index
> Fetch the complete documentation index at: https://docs.oloid-demo.com/llms.txt
> Use this file to discover all available pages before exploring further.

# How to Configure Data Mapper Table for ADP ETime Inbound in the Tenant Admin Portal

> This document provides step-by-step instructions to configure Data Mapper Table for ADP ETime Inbound in Tenant Admin Portal.

## Introduction

This document provides instructions on how to configure a Data Mapper Table for ADP ETime Inbound in the Tenant Admin Portal.

## Prerequisites

* You must have access to the **Tenant Admin Portal.**
* Data Mapper Table for ADP ETime Inbound must be created. To create refer, [How to Create Data Mapper Table for ADP ETime Inbound in the Tenant Admin Portal](https://oloid.help/en/articles/14468332-how-to-create-data-mapper-table-for-adp-etime-inbound-in-the-tenant-admin-portal).

## Steps to Configure Data Mapper Table for ADP ETime Inbound

1. Log in to the **Tenant Admin Portal**.
2. On the home page of the portal, go to **Agents > Data Tables**.

   ![How to Configure Data Mapper Table for... - screenshot 1](https://mintcdn.com/oloid-999c42b2/pBwn4QiXrtMvy9PW/images/intercom/14468403/image-8c032d90.png?fit=max\&auto=format\&n=pBwn4QiXrtMvy9PW\&q=85\&s=b80cf819cf225e52a446aa850ff02bea)

   The **Data Tables** page is displayed.
3. Click the ADP Etime data table.

   ![How to Configure Data Mapper Table for... - screenshot 2](https://mintcdn.com/oloid-999c42b2/pBwn4QiXrtMvy9PW/images/intercom/14468403/image-80885662.png?fit=max\&auto=format\&n=pBwn4QiXrtMvy9PW\&q=85\&s=15bc6fbf0a035014637935e71fbb02ff)

   The data table details page is displayed.
4. Do the Following:
   1. [Configure Details Tab](#configure-details-tab)
   2. [Setup Configure Tab](#setup-configure-tab)

      ![How to Configure Data Mapper Table for... - screenshot 3](https://mintcdn.com/oloid-999c42b2/pBwn4QiXrtMvy9PW/images/intercom/14468403/image-217a97bc.png?fit=max\&auto=format\&n=pBwn4QiXrtMvy9PW\&q=85\&s=568dfe7c123d95d1baf457fc57625c30)

      After saving your changes, the Data Mapper Table for **ADP ETime Inbound** is configured successfully.

### Configure Details Tab

This tab is used to view and edit basic information about the data mapper table.

Do the following:

1. Update the **Table Name** (Optional).
2. Enter **Description** (Optional).
3. Click **Save**.

   ![How to Configure Data Mapper Table for... - screenshot 4](https://mintcdn.com/oloid-999c42b2/pBwn4QiXrtMvy9PW/images/intercom/14468403/image-cc14c4ab.png?fit=max\&auto=format\&n=pBwn4QiXrtMvy9PW\&q=85\&s=d94bf11a4fb15732df3d3e7e77827140)

   The details tab is configured successfully.

### Setup Configure Tab

This tab is used to configure data field mappings between ADP Etime and Oloid.

> [!NOTE]
>
> **Note:** The **FullName, DisplayName, PrimaryID, and Status** fields are mandatory and must be mapped to corresponding source fields or expressions before saving the configuration.

Do one of the following:

* [Inline](#inline)
  **OR**
* [Upload File](#upload-file)

  ![How to Configure Data Mapper Table for... - screenshot 5](https://mintcdn.com/oloid-999c42b2/pBwn4QiXrtMvy9PW/images/intercom/14468403/image-c153c9ff.png?fit=max\&auto=format\&n=pBwn4QiXrtMvy9PW\&q=85\&s=0e97181b25d58b9809beff3a75fdd4ca)

  The Configure tab is set up successfully.

### Inline

In the **Inline** section, do the following:

1. **Source / Expression:** Enter the ADP field name or expression that provides the source value.

2. **Destination – Oloid Field:** Enter the Oloid field name to which the source value is mapped.

3. **Data Type:** Select the data type from the drop-down.

4. Click **Add field** to add more fields.

   > [!NOTE]
   >
   > **Note:** For mapping the table, refer **[Data mapper Table](#steps-to-configure-data-mapper-table-for-adp-etime-inbound)**.

5. Click **Save**.

   ![How to Configure Data Mapper Table for... - screenshot 6](https://mintcdn.com/oloid-999c42b2/pBwn4QiXrtMvy9PW/images/intercom/14468403/image-115c47b1.png?fit=max\&auto=format\&n=pBwn4QiXrtMvy9PW\&q=85\&s=51fcaf479702facab78f4a853927cae2)

   The Inline section is configured successfully.

### Upload File

In the **Upload File** section, do the following:

1. Select **Upload File** and upload the mapping file.

   > [!NOTE]
   >
   > **Note:** The file format must be in **.XLSX** or **.CSV**.

2. Click **Save**.

   ![How to Configure Data Mapper Table for... - screenshot 7](https://mintcdn.com/oloid-999c42b2/pBwn4QiXrtMvy9PW/images/intercom/14468403/image-c1457c33.png?fit=max\&auto=format\&n=pBwn4QiXrtMvy9PW\&q=85\&s=a337eaa98784e3177433865a8bd7ea11)

   The Upload File section is configured successfully.
   The Configure tab is set up successfully.

   ![How to Configure Data Mapper Table for... - screenshot 8](https://mintcdn.com/oloid-999c42b2/pBwn4QiXrtMvy9PW/images/intercom/14468403/image-a33ef98a.png?fit=max\&auto=format\&n=pBwn4QiXrtMvy9PW\&q=85\&s=e2526888c9b5f9ea14849e6508bd70af)

## Additional Information

### Data Mapping Table

Use the following fields to define data mappings when configuring the Data Mapper Table.

**ADP Use Field**

**Oloid User Field**

**Data Type**

FullName

FullName

String

FullName

DisplayName

String

PersonNumber

PrimaryID

String

Status

Status

String

\{UserMetadata.Shifts}

\{UserMetadata.Shifts}

String

> [!NOTE]
>
> **Note:** Contact **[Oloid support](mailto:support@oloid.ai)** if you need assistance while configuring the Data Mapper table.

##### Related Article

[How to Create Data Mapper Table for ADP ETime Inbound in the Tenant Admin Portal](https://oloid.help/en/articles/14468332-how-to-create-data-mapper-table-for-adp-etime-inbound-in-the-tenant-admin-portal)